Skip to content
▪ JetLabel 1.2.0 · Mac, iPhone and iPad · 7-day free trial · Pro: one-time in-app purchase
JetLabel™
Features Barcodes Printers Pricing FAQ Highlights in JetLabel 1.2.0 Try free for 7 days
Printers · Star Micronics

Star Micronics TSP650II on Mac — Setup & Label Printing with JetLabel

Works on Mac with the macOS driver

The Star Micronics TSP650II is a 203 dpi label printer from Star Micronics that uses ESC/POS. On Mac, JetLabel prints through the macOS printing system: install the macOS driver from Star Micronics, add the printer in System Settings and choose it in JetLabel. Printing from iPhone and iPad is not supported for the Star Micronics TSP650II.

Try JetLabel free for 7 days
Star Micronics TSP650II — spec sheet
Protocol
ESC/POS
Resolution
203 dpi
Interfaces
USB, Eth, BT
macOS driver
Yes
iPhone & iPad
Not supported
Recommended
80 mm receipt roll

Printing from iPhone and iPad

JetLabel on iOS and iPadOS supports AirPrint and suitably configured network label printers using supported protocols. Check the printer and its network configuration before printing.

Each model page shows whether the printer works on Mac with its macOS driver and whether direct network printing from iPhone and iPad is possible. The ratings are based on manufacturer specifications. Brother QL and Bluetooth direct printing are not supported on iOS.

Does the Star Micronics TSP650II work on macOS?

Yes, with the macOS driver from Star Micronics. JetLabel prints through the macOS printing system; on Mac it does not send printer commands directly. This assessment is based on the manufacturer’s specifications, not on a test by JetLabel. Try it with your printer during the 7-day trial.

And on iPhone and iPad?

Printing from iPhone and iPad is not supported for the Star Micronics TSP650II.

Setup

Set it up on your Mac.

  1. 01 Download and install the macOS driver for the Star Micronics TSP650II from Star Micronics.
  2. 02 Connect the printer to your Mac and add it in System Settings → Printers & Scanners.
  3. 03 Load the labels and calibrate the media on the printer.
  4. 04 In JetLabel, set the label size to match the loaded labels.
  5. 05 Choose the Star Micronics TSP650II as the printer in JetLabel and print a test label.
FAQ

About the Star Micronics TSP650II

No. JetLabel prints on Mac through the macOS printing system, so the Star Micronics TSP650II needs a working macOS driver.

Printing from iPhone and iPad is not supported for the Star Micronics TSP650II.

Print to your Star Micronics TSP650II today.

Try JetLabel free for 7 days

Star Micronics is a trademark of its respective owner. JetLabel is independent and not affiliated with Star Micronics. Compatibility information is based on manufacturer specifications and has not been individually verified.