Skip to content
▪ JetLabel 1.2.0 · Mac, iPhone and iPad · 7-day free trial · Pro: one-time in-app purchase
JetLabel™
Features Barcodes Printers Pricing FAQ Highlights in JetLabel 1.2.0 Try free for 7 days
Printers · MUNBYN

MUNBYN ITPP129 on Mac — Setup & Label Printing with JetLabel

Works on Mac with the macOS driver

The MUNBYN ITPP129 is a 203 dpi label printer from MUNBYN that uses TSPL. On Mac, JetLabel prints through the macOS printing system: install the macOS driver from MUNBYN, add the printer in System Settings and choose it in JetLabel. On iPhone and iPad, JetLabel can send TSPL directly over the network (port 9100) when the printer is connected via Ethernet or Wi-Fi.

Try JetLabel free for 7 days
MUNBYN ITPP129 — spec sheet
Protocol
TSPL
Resolution
203 dpi
Interfaces
USB, BT, WLAN
macOS driver
Yes
iPhone & iPad
Network printing (TSPL)
Recommended
60 × 30 mm, 100 × 150 mm

Printing from iPhone and iPad

JetLabel on iOS and iPadOS supports AirPrint and suitably configured network label printers using supported protocols. Check the printer and its network configuration before printing.

Each model page shows whether the printer works on Mac with its macOS driver and whether direct network printing from iPhone and iPad is possible. The ratings are based on manufacturer specifications. Brother QL and Bluetooth direct printing are not supported on iOS.

Does the MUNBYN ITPP129 work on macOS?

Yes, with the macOS driver from MUNBYN. JetLabel prints through the macOS printing system; on Mac it does not send printer commands directly. This assessment is based on the manufacturer’s specifications, not on a test by JetLabel. Try it with your printer during the 7-day trial.

And on iPhone and iPad?

On iPhone and iPad, JetLabel can send TSPL directly over the network (port 9100) when the printer is connected via Ethernet or Wi-Fi.

Setup

Set it up on your Mac.

  1. 01 Download and install the macOS driver for the MUNBYN ITPP129 from MUNBYN.
  2. 02 Connect the printer to your Mac and add it in System Settings → Printers & Scanners.
  3. 03 Load the labels and calibrate the media on the printer.
  4. 04 In JetLabel, set the label size to match the loaded labels.
  5. 05 Choose the MUNBYN ITPP129 as the printer in JetLabel and print a test label.
FAQ

About the MUNBYN ITPP129

No. JetLabel prints on Mac through the macOS printing system, so the MUNBYN ITPP129 needs a working macOS driver.

On iPhone and iPad, JetLabel can send TSPL directly over the network (port 9100) when the printer is connected via Ethernet or Wi-Fi.

Print to your MUNBYN ITPP129 today.

Try JetLabel free for 7 days

MUNBYN is a trademark of its respective owner. JetLabel is independent and not affiliated with MUNBYN. Compatibility information is based on manufacturer specifications and has not been individually verified.