Skip to content
▪ JetLabel 1.2.0 · Mac, iPhone and iPad · 7-day free trial · Pro: one-time in-app purchase
JetLabel™
Features Barcodes Printers Pricing FAQ Highlights in JetLabel 1.2.0 Try free for 7 days
Printers · Epson

Epson TM-m30 on Mac — Setup & Label Printing with JetLabel

Works on Mac with the macOS driver

The Epson TM-m30 is a 203 dpi label printer from Epson that uses ESC/POS. On Mac, JetLabel prints through the macOS printing system: install the macOS driver from Epson, add the printer in System Settings and choose it in JetLabel. Printing from iPhone and iPad is not supported for the Epson TM-m30.

Try JetLabel free for 7 days
Epson TM-m30 — spec sheet
Protocol
ESC/POS
Resolution
203 dpi
Interfaces
USB, Eth, BT, WLAN
macOS driver
Yes
iPhone & iPad
Not supported
Recommended
80 mm receipt roll

Printing from iPhone and iPad

JetLabel on iOS and iPadOS supports AirPrint and suitably configured network label printers using supported protocols. Check the printer and its network configuration before printing.

Each model page shows whether the printer works on Mac with its macOS driver and whether direct network printing from iPhone and iPad is possible. The ratings are based on manufacturer specifications. Brother QL and Bluetooth direct printing are not supported on iOS.

Does the Epson TM-m30 work on macOS?

Yes, with the macOS driver from Epson. JetLabel prints through the macOS printing system; on Mac it does not send printer commands directly. This assessment is based on the manufacturer’s specifications, not on a test by JetLabel. Try it with your printer during the 7-day trial.

And on iPhone and iPad?

Printing from iPhone and iPad is not supported for the Epson TM-m30.

Setup

Set it up on your Mac.

  1. 01 Download and install the macOS driver for the Epson TM-m30 from Epson.
  2. 02 Connect the printer to your Mac and add it in System Settings → Printers & Scanners.
  3. 03 Load the labels and calibrate the media on the printer.
  4. 04 In JetLabel, set the label size to match the loaded labels.
  5. 05 Choose the Epson TM-m30 as the printer in JetLabel and print a test label.
FAQ

About the Epson TM-m30

No. JetLabel prints on Mac through the macOS printing system, so the Epson TM-m30 needs a working macOS driver.

Printing from iPhone and iPad is not supported for the Epson TM-m30.

Print to your Epson TM-m30 today.

Try JetLabel free for 7 days

Epson is a trademark of its respective owner. JetLabel is independent and not affiliated with Epson. Compatibility information is based on manufacturer specifications and has not been individually verified.