Skip to content
▪ JetLabel 1.2.0 · Mac, iPhone and iPad · 7-day free trial · Pro: one-time in-app purchase
JetLabel™
Features Barcodes Printers Pricing FAQ Highlights in JetLabel 1.2.0 Try free for 7 days
Printers · Bixolon (ESC/POS)

Bixolon SRP-350plusII on Mac — Setup & Label Printing with JetLabel

Works on Mac with the macOS driver

The Bixolon SRP-350plusII is a 180 / 203 dpi label printer from Bixolon (ESC/POS) that uses ESC/POS. On Mac, JetLabel prints through the macOS printing system: install the macOS driver from Bixolon (ESC/POS), add the printer in System Settings and choose it in JetLabel. Printing from iPhone and iPad is not supported for the Bixolon SRP-350plusII.

Try JetLabel free for 7 days
Bixolon SRP-350plusII — spec sheet
Protocol
ESC/POS
Resolution
180 / 203 dpi
Interfaces
USB, Serial, Eth
macOS driver
Yes
iPhone & iPad
Not supported
Recommended
80 mm receipt roll

Printing from iPhone and iPad

JetLabel on iOS and iPadOS supports AirPrint and suitably configured network label printers using supported protocols. Check the printer and its network configuration before printing.

Each model page shows whether the printer works on Mac with its macOS driver and whether direct network printing from iPhone and iPad is possible. The ratings are based on manufacturer specifications. Brother QL and Bluetooth direct printing are not supported on iOS.

Does the Bixolon SRP-350plusII work on macOS?

Yes, with the macOS driver from Bixolon (ESC/POS). JetLabel prints through the macOS printing system; on Mac it does not send printer commands directly. This assessment is based on the manufacturer’s specifications, not on a test by JetLabel. Try it with your printer during the 7-day trial.

And on iPhone and iPad?

Printing from iPhone and iPad is not supported for the Bixolon SRP-350plusII.

Setup

Set it up on your Mac.

  1. 01 Download and install the macOS driver for the Bixolon SRP-350plusII from Bixolon (ESC/POS).
  2. 02 Connect the printer to your Mac and add it in System Settings → Printers & Scanners.
  3. 03 Load the labels and calibrate the media on the printer.
  4. 04 In JetLabel, set the label size to match the loaded labels.
  5. 05 Choose the Bixolon SRP-350plusII as the printer in JetLabel and print a test label.
FAQ

About the Bixolon SRP-350plusII

No. JetLabel prints on Mac through the macOS printing system, so the Bixolon SRP-350plusII needs a working macOS driver.

Printing from iPhone and iPad is not supported for the Bixolon SRP-350plusII.

Print to your Bixolon SRP-350plusII today.

Try JetLabel free for 7 days

Bixolon (ESC/POS) is a trademark of its respective owner. JetLabel is independent and not affiliated with Bixolon (ESC/POS). Compatibility information is based on manufacturer specifications and has not been individually verified.